S-0808: 8 x 8 Digital Snake

Új lehetőségek a soksávos hangtovábbításban



Learn more about power options for the S-0808 Digital Snake. Find out more >
The S-0808 has unprecedented mobility enabling further convenience in many applications such as broadcast, event, live stage, audio installation and location sound. Enjoy flexibility in setup using external battery operation or power supplied over REAC.

Product Highlights

  • 8 inputs x 8 outputs
  • Compact, light-weight, rugged
  • External battery powered or embedded power over REAC
  • TRS and Hi-Z inputs


Több Infó

Compact and Light-weight
The S-0808 weighs around 6.6lbs making it portable and easy to setup. Rugged construction with steel handles withstands the rigors of live applications and frequent use. Fan-less design enables quiet operation in any environment.

Superb Quality, Fully Discreet Preamp
All inputs employ a high quality preamp with fully discreet circuit design resulting in outstanding sound. Eliminate the need for direct boxes by using the TRS or Hi-Z inputs. Control input gain (-65 to +10dBu), Pad and Phantom Power via a dedicated S-4000R Remote Controller or using the PC Remote Control Software (S-4000RCS). When using as part of a V-Mixing System, these parameters are controlled directly from the M-400 or M-380 V-Mixer.

Power Options
The S-0808 is powered by REAC Embedded Power, External Battery Options or Power over Ethernet (PoE). Choose the type of power conducive to you location and application. Having not to rely on AC power opens up a world of convenience and flexibility. V-Mount (IDX) and Gold Mount (Anton Bauer) battery systems and mounts are supported using the included universal adapter plate.




Example Configurations

Configure for a variety of applications and environments. Connectivity is simple enabling rapid system changes, expansion and flexibility.

Simple system setup using a pair of S-0808s. The S-4000M in a Broadcast Truck (OB Van) provides power to the remote location. Control the remote inputs using the S-4000R.
View PDF

Small concert/event configuration using two battery-powered I/O units enable convenience in placing the talent where AC power is not necessarily available. Mix using your choice of V-Mixer.
View PDF

This system allows I/O to be place in 4 separate locations using S-0808s. The signals from the 4 units are merged by the S-4000M as it travels to the S-4000H breakout location. Power to each of the S-0808s is supplied by the embedded power over REAC in the S-4000M.
View PDF

This system enables the placement of S-0808 units around a stage conveniently
located by the drum riser, keyboards, background vocals, etc.
View PDF

View PDF


S-0808 Specifications
Number of Channels
8 in 8 out
AD/DA Conversion
Sample Rate: 96.0 kHz / 48.0kHz / 44.1kHz Signal Processing: 24 bits
Frequency Response
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic Distortion + Noise
0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)
Dynamic Range
110 dB
Cross Talk
-80 dB or less (Input Gain: +4 dBu, typ.)
Nominal Input Level
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
20 dB On/Off
Input Impedance
600 ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level (IHF-A, typ.)
-80 dBu or less
Equivalent Input Noise Level (E.I.N.)
-128 dB
Network Latency
375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1.2 ms)
Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)
Power Supply
REAC EMBEDDED POWER or External Battery (DC 12V - 18V)
Power Consumption
24 W
Phantom Power
+48 V / 14 mA (each input, remote controlled)
Battery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owner's Manual
*1: XLR connector 1: GND, 2: HOT, 3: COLD *2: TRS takes priority if XLR and TRS are simultaneously input to INPUT 5-8. *3: TRS of INPUT 7/8 turns to unbalanced when Hi-Z is turn on. * When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds.
(0 dBu = 0.775 Vrms)
Size and Weight
220 mm
8-11/16 inches
176 mm
6-15/16 inches
157 mm
6-3/16 inches
2.9 kg
6 lbs. 7 oz.
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.




Compressed ZIP file S-4000 Távvezérlő Szoftver v2.200 Windows Operációs Rendszerhez
S-4000 RCS lehetővé teszi bármilyen Digital Snake Rendszer távvezérlését, S-4000M Merge egység konfigurálását, vagy az M-48 Személyi Monitorkeverő Rendszer vezérlését Windows operációs rendszerrel ellátott számítógépen.
.dmg file S-4000/S-1608 Remote Control Software Mac v1.003
S-4000 RCS software enables your Mac to remotely control a S-4000S or S-1608S Digital Snake system.
Compressed ZIP file S-0808 Images


Ha bármilyen felhasználói kérdése merülne fel eszközével (S-0808) kapcsolatban, kérjük forduljon szakértőinkhez telefonon vagy e-mailben.


Compressed ZIP file S-0808 Dimensions DXF
PDF file S-0808 Features and Benefits
PDF file S-0808 Mounting Pattern
PDF file Introduction to the Digital Snake
PDF file Introduction to the V-Mixing System
PDF file S-0808 Owner's Manual
PDF file S-4000RCS Owner's Manual
PDF file S-0808 Brochure
PDF file Digital Snake System Brochure